18 |
Getting ready to use the system | E5024 ECDIS Installation Manual
Installing charts from other suppliers
The chart suppliers have different procedure for submitting Chart permit codes and charts.
For chart suppliers other than NAVTOR it is required to install Chart permits before charts can
be copied to the system. Refer to the supplier documentation for details.
Chart permits are copied to the system by using the Install permits menu option.
When Chart permits are installed, the charts have to be copied from an USB or SD drive to the
E5024 system by using the Find and install charts menu option.
Selecting charts to display
All chart databases installed in the E5024 system are listed in the Chart library.
Select the Display option for the chart databases you want to use.
If you have more than one database available, you can select to show multiple charts. The
system will however only display one chart at the time, and it will automatically select the
best chart available based on your vessel’s position.
To Next Page
Loading...
Need help?
General
