| 23
ECDIS Software setup | E5024 ECDIS Installation Manual
Line monitor - sensor data stream
To check that a sensor is providing data, open the sensor by selecting the sensor icon, then
select the Line monitor option in the top right corner. The data is shown in raw format, and
updated in real-time.
Websocket interface connection
The Simrad web interface is an easy to use web-style portal that lets you configure NMEA
2000 sensors. You can access the Sources, the Device list, and configure most of the hardware
available in the system.
¼ Note: An up to date web browser that supports websockets must be used to access the
Simrad web interface.
To Next Page
Loading...
Need help?
General
