32 |
ECDIS Software setup | E5024 ECDIS Installation Manual
Lost Radar Target Alarm
ECDIS triggers a visible and audible warning in case a dangerous radar target is lost. When the
Lost Radar target alarm is ticked on, the system alerts you if any radar targets are lost within
the range specified. Any targets lost outside the specified range will not trigger an alarm.
You can turn off this alarm filter.
To turn On / O the lost radar target alarm:
Open the alarms panel by accessing the Menu, then Settings, and Alarms.
• To turn the alarm off, tick off the Lost radar target alarm check box. When the alarm
is off, an indication is displayed in the chart view
• To turn the alarm on, tick on the Lost radar target alarm check box. The indication
is removed from the chart view
To Next Page
Loading...
Need help?
General
