Simrad - HH33 Installation and Operation Instructions24
Hold down the CALL/ MENU key to enter radio set-up mode. This allows the following
functions to be accessed. Scroll down the list and press ENTER. To exit the Menu or sub-
menu modes press 16 or EXIT.
WAYPOINT Selects the WP List Entry to enter names and LL positions for a WP.
Up to 500 WP can be stored.
BACKLIGHT Sets the backlight level: 8 levels.
LAMP Sets the backlight lamp time out.
BUDDY LIST Selects the Buddy List Entry to enter names and MMSI’s for
regularly called DSC stations. Up to 20 names can be stored (US only).
CONTRAST Selects display contrast setting: 1-4 levels.
GPS/DATA Select to change the following GPS/DATA settings: Time Oset, Format,
Display, LL Display, COG/SOG, GPS Alert, GPS Enabled.
RADIO SETUP Select to change the following RADIO settings: Band, CH Name, Ring
Tone Volume, Beep Volume, Units, Watch mode, WX alert
DSC SETUP Select to change the following DSC settings: User MMSI enter, Group
MMSI, INDIV RELAY AND LL Relay (US only).
ATIS SETUP Select to change the following ATIS settings: ATIS MMSI Enter, ATIS
Select. (EU Only).
GET BUDDY Enable or disable Buddy Data and Auto Function.
TRACK LOG Set the distance interval for recording the track points.
ERASE TRACE Erase track history points.
RESET Reset to factory settings.
Set-up Menu Navigation
To access the Menu Mode:
Press and hold CALL/MENU key, or press MENU key. Text area displays the Set-Up •
Menu list.
Press the 16 or ESC soft-key to exit from the menu.1.
Press the CH 2.
/ to select the Item within the Set-Up Menu list. To conrm a
selected item, push ENTER soft-key.
Or use CH 3.
/ knob to enter alphanumeric or alphabet data.
To conrm a selected item, push ENTER soft-key. 4.
Turn unit o. All changes are saved to EEPROM.5.
To Next Page
Loading...
