Simrad HH33E - Relay a Distress Call from the Distress LOG (RELAY)

Simrad - HH33 Installation and Operation Instructions62
At the same time, the LCD screen displays the distress acknowledgement and the
MMSI (or buddy name) of the vessel sending it. After one second, the LCD screen
changes to show the MMSI and position of the distressed vessel, including the type
of distress call.
Press ESC or 16/9 to cancel the LCD screen cycle, then press PTT to try and establish 2.
voice contact with the coast guard or press ESC again to maintain a listening watch
on CH16.
6-5 Relay a Distress Call from the Distress LOG (RELAY)
123456789
DELETE
SAVE MMSI
>RELAY
DSC CALL
ALL SHIPS
CALL LOG
> DIST LOG
DISTRESS
10:03 UTC
82° 50.123’N’
127° 45.456’W
02 123456789
DISTRESS
PIRACY
ALL RELAY
RELAY
>INDIV RELAY
ALL RELAY
INDIV RELAY
>MANUAL NEW
BUDD1
You can Relay a Distress Call from your Distress Log to an individual or to ALL SHIPS.
Press CALL/MENU to enter the DSC CALL menu, then select DIST LOG.1.
The most recently received distress call is the rst entry(01) in the Distress Log. 2.
Select the distress call that you want to relay, then select RELAY.
Either select:3.
INDIV RELAY. It relays the distress call to an individual. Select MANUAL NEW if the person •
is not in your buddy list, otherwise scroll to the name of your buddy. Press ENTER. (If
you select MANUAL NEW, you need to enter the user MMSI then press ENTER).
ALL RELAY. It relays the distress call to all ships, then press ENTER.•
4. The radio automatically selects CH16 (For ALL RELAY), or manually set the working
channel (INDIV RELAY). It displays the detail of the distress call on the screen.
5. Press ENTER to Relay the distress call.