Simrad HH33E - Turn GPS ENABLE On;Off; Set Magnetic Variation (MAG VAR)

Simrad - HH33 Installation and Operation Instructions36
4-6-8 Turn GPS ENABLE on/off
SETTING
COG/SOG
GPS ALERT
>GPS ENABLED
GPS ENABLED
>ON
OFF
In the radio setup MENU, select GPS/DATA, then SETTING.1.
Move the cursor to GPS ENABLED and press ENTER.2.
Select ON/OFF as desired, in this example, ON has been selected, so the GPS 3.
ENABLED is turned ON.
4-6-9 Set Magnetic Variation (MAG VAR)
SETTING
GPS ALERT
GPS ENABLED
>MAG VAR
MAG VAR
00.0
°W AUTO
In the radio setup MENU, select GPS/DATA, then SETTING. 1.
Select MAG VAR.2.
Note: AUTO MAG VAR is default - set 00.0 for TRUE
Use CH
/ to adjust the MAGNETIC dierence between true and variation, then press
ENTER to conrm selection.
MAG VARIATION
XX.X
°W (or E)
Note: W is the default and tenths of a degree is required.
SAVE
>YES
NO