Simrad HH33E - Set the Priority Channel (WATCH MODE) (US Only); Weather Alerts (WX ALERT) (US Only); Set NMEA out (NMEA OUT)

Simrad - HH33 Installation and Operation Instructions 39
4-7-6 Set the Priority Channel (WATCH MODE) (US only)
If you are operating on the USA or Canada Channel banks. You can have the priority chan-
nel to cover both CH16 and CH09 as well as the working channel, similar to a TRI WATCH.
Select RADIO SETUP, then WATCH MODE.1.
Select the desired setting, and then press ENTER.2.
RADIO SETUP
KEY BEEP
UNITS
>WATCH MODE
WATCH MODE
>ONLY 16
16CH+9CH
4-7-7 Weather Alerts (WX ALERT) (US only)
The NOAA provides several weather forecast channels on US and Canadian channel banks.
If severe weather such as storms or hurricanes are forecast, the NOAA broadcasts a weather
alert on 1050 Hz.
You can choose to watch weather alerts.
RADIO SETUP
UNITS
WATCH MODE
>WX ALERT
WX ALERT
>ON
OFF
Select RADIO SETUP then WX ALERT.1.
The cursor is ON (NOAA weather alerts on 1050 Hz on normal mode). 2. If you do not
want to watch these weather alerts, move the cursor to OFF.
Press ENTER for to conrm your selection.3.
If you chose to receive the weather alerts, the beeps will sound whenever a weather
alert is broadcast. Just press any button to hear it.
4-7-8 Set NMEA OUT (NMEA OUT)
RADIO SETUP
WATCH MODE
UWX ALERT
>NMEA OUT
NMEA OUT
>ON
OFF
The HH33 can output NMEA 0183 sentences. Supported sentences are: RMC, GGA, GLL,
GNS, GSV