Simrad HH33E - Delete a Waypoint; Set a Route to a Stored Waypoint

Simrad - HH33 Installation and Operation Instructions 29
4-2-3 Delete a waypoint
FISH 2
GO
WP EDIT
>DELETE
MENU SELECT
>WAYPOINT
BACKLIGHT
LAMP
WAYPOINT
>WP LIST
NEAREST WP
TEMP
WP LIST
NEW WP
FISH 1
>FISH 2
DELETE
FISH 2
>YES
NO
WP LIST
NEW WP
FISH 1
>HOME
Hold down CALL MENU for about 3 seconds (US only); or press menu (EU only).
The cursor is at WAYPOINT, press ENTER.1.
Select WP list and press ENTER. The cursor is at new WP, scroll down to the waypoint 2.
you want to delete, then press ENTER.
The cursor is at GO. Move the cursor to delete and push ENTER.3.
The waypoint is deleted immediately and the revised waypoint list is displayed.4.
4-2-4 Set a route to a stored waypoint
HOME
>GO
WP EDIT
DELETE
MENU SELECT
>WAYPOINT
BACKLIGHT
LAMP
WAYPOINT
>WP LIST
NEAREST WP
TEMP
WP LIST
NEW WP
FISH 1
>HOME
GO
HOME
>YES
NO
Hold down CALL/MENU for about 3 seconds (US only); or press MENU (EU only).1.
The cursor is at WAYPOINT. Press ENTER.2.
The cursor is at WP list, press ENTER. The cursor is at new WP, scroll down to the 3.
waypoint to use as the route then press ENTER.
The cursor is at GO and push ENTER and enter the navigation mode. The waypoint is 4.
set as your next destination.