Simrad HH33E - Radio Setup and Configuration

Simrad - HH33 Installation and Operation Instructions 37
4-7 Radio Setup
Under Radio Setup submenu, there are 7 items that user can alter settings.
MENU SELECT
CONTRAST
GPS/DATA
>RADIO SETUP
4-7-1 UIC (US only)
You can select the: USA, International, or Canadian channel band. The channel bands are
listed in the appendix sections.
RADIO SETUP
>UIC
CH NAME
RING VOLUME
UIC
>USA
INT’L
CANADA
In the radio setup MENU, select RADIO SETUP.1.
The cursor is at UIC, press ENTER.2.
The cursor is at USA.3.
If you want to select the International channel band, move the cursor to INT’L. If you
want to select the Canadian channel band, move the cursor to CANADA.
Press ENTER to conrm your choice.4.
The new channel band is selected. Depending on your choice, the USA, INT’L, or 5.
CAN icon is shown on the screen.
4-7-2 Channel Name Editing
To setup the channel name to ON or to blank the rst line.
Select RADIO SETUP, CH NAME, and then press ENTER. Then select the desired 1.
channel name by using the CH
/ . Press ENTER then the screen will show the
channel name, EDIT and DELETE (Maximum of 12 characters).
Select EDIT and press ENTER to edit the existing name tag. Input the new name over 2.
the existing one and press ENTER to display the YES/NO conrmation.
To delete the channel name, just select DELETE then press ENTER.
Press ENTER to conrm the new channel name and then press cancel to return to the 3.
menu.