Simrad HS80 - Page 49

| 47
Technical specications | HS80/HS80A/MX575C/MX575D User Manual
Values Description
OTHER
Specifying OTHER instructs the receiver to use external corrections input
through the opposite port from which you are communicating
BEACON
Specifying BEACON instructs the receiver to use corrections from the
internal SBX beacon engine
WAAS Specifying WAAS instructs the receiver to use SBAS corrections
LBAND Specifying LBAND instructs the receiver to use OmniSTAR corrections.
AUTODIFF Specifying AUTODIFF instructs the receiver to use eDif mode
NONE
In order for the receiver to operate in autonomous mode, the NONE
argument may be specified in this command.
Example:
$JDIFF,BEACON*
$JDIFF,LBAND*
$JDIFF,WAAS*