Software Setup
The system requires some initial configuration before use and in order to get the most out of
the product. You can change the settings later, as conditions change and as you become
more familiar with the product.
Select the settings menu option to access configurable items described in the following
sections.
Wiring and mounting information are provided in the separate installation instructions for
the unit.
System settings
Use the system settings dialog to set basic settings as described below. Some settings can
require a reboot of the system.
Language
Controls the language used on this unit for panels, menus, and dialogs. Changing the
language causes the unit to restart.
Text size
Used for setting the text size in menus and dialogs.
Default setting: Normal
Key beeps
Controls the loudness of the beep sound when a key is pressed.
Default setting: Loud
Time
Controls the local time zone offset, and the format of the time and date.
Restore defaults
Allows you to select which settings are to be restored to their original factory settings.
Coordinate system
Several coordinate systems can be used to control the format for latitude and longitude
coordinates displayed on the chart panel.
Magnetic variation
Magnetic variation is the difference between true bearings and magnetic bearings, caused
by different locations of the Geographic and the Magnetic north poles. Any local anomalies
such as iron deposits might also affect the magnetic bearings.
10
Software Setup | S2009-2016 Fish Finder User Manual
37
To Next Page
Loading...
Need help?
General
