Need help?Do you have a question about the Simrad S2009 and is the answer not in the manual?
General| Display Size | 9-inch |
|---|---|
| Display Type | LCD |
| Resolution | 800 x 480 pixels |
| Interface | Keypad |
| Waterproof Rating | IPX7 |
| NMEA 2000 Connectivity | Yes |
| Display | Color LCD |
| Operating Voltage | 10-31.2 V DC |
| Operating Temperature | -15°C to +55°C |
| Storage Temperature | -30°C to 70°C |
| Ethernet Ports | 1 |
| NMEA 0183 Ports | 1 x NMEA 0183 |
| Frequency | 50 kHz, 200 kHz |
| Depth Range | Up to 3000 m |
| Transducer Type | Compatible with multiple transducer options |
Advises reading manuals and using simulators to prevent misuse.
Details the different display areas and numbered elements of the main operational screen.
Outlines how to navigate through the main menu, sub-menus, and dialogs.
Describes accessing basic system settings via the Power key.
Details the procedure for powering the unit on and off.
Explains how to adjust the depth range visible on the screen.
Describes how to magnify the sonar image.
Details how to select different transducer frequencies for optimal sonar performance.
Explains how to adjust the sonar sensitivity for clearer target detection.
Explains how to divide the screen for multiple data views.
Details the procedure for acknowledging and clearing system alerts.
Explains filtering signal interference for a cleaner image.
Explains how to start and manage sonar data logging.
Details the procedure to halt ongoing data recording.
Describes browsing, copying, renaming, and deleting files on the unit.
Advises on choosing an optimal and safe location for unit installation.
Advises on minimum separation distances from other electronic devices.
Provides step-by-step instructions for mounting using a U-bracket.
Describes the process for flush-mounting the unit into a panel.
Offers best practices for routing and securing electrical cables.
Identifies and describes the purpose of rear panel connectors.
Explains the power supply requirements and connection procedures.
Explains how to plan and install an NMEA 2000 network.
Covers initial configuration of language, time, and general system parameters.
Covers configuring the echosounder source and parameters.
Explains configuring network connections and devices.
Explains choosing preferred data sources for system parameters.
Provides tools for identifying network and system issues.
Details settings for NMEA 2000 devices and waypoints.
Explains configuring the NMEA 0183 port for data transmission.
Explains how serial output sentences are logged internally.
Lists display type, brightness, resolution, and size.
To Next Page
