Simrad SimNet - Operating Radar from an NSS Unit

I
N
S
T
A
L
L
29
RADAR: BROADBAND RADAR 3G
Operating radar from an NSS unit
The radar’s operational modes are controlled from the
NSS unit. The following modes are available:
• Off: The power to the radar scanner is turned off.
• Standby: The power to the radar scanner is on,
but the radar is not transmitting any signals.
The radar can also be turned to standby mode by
pressing the PWR key.
• Transmit: The scanner is on and transmitting.
Detected targets will be drawn on the radar PPI
(Plan Position Indicator).