Simrad TP32 User Manual

| 7
Autotacking/gybing in Nav mode
As the Tillerpilot will be steering directly to a waypoint, the
autotack/gybe facility is disabled while in Nav mode.
If it is necessary to perform an autotack/gybe, disengage Nav mode
by pressing the NAV key then perform the autotack/gybe.
Warning: Ensure that the boat is on the correct tack before
re-engaging Nav mode.

Simrad TP32 Specifications

General

Type	Autopilot
Operating Voltage	12 V
Auto Seastate	Yes
Course Accuracy	± 1°
Operating Temperature	-15°C to +55°C
Keypad	Yes
Power Supply	12 V DC
Power Consumption	0.5 A
Peak Thrust	80 kg (176 lbs)
Display	No