Simuline Cycraft - INSTALLATION INSTRUCTION; 5.1 LOCATION REQUIREMENTS

Page 23
5. INSTALLATION INSTRUCTION
5.1 LOCATION REQUIREMENTS
5.1.1 ENVIRONMENT REQUIREMENTS
Cycraft is designed for indoor use and should never be installed outdoors.
Environment and facility requirements are as follows:
Installation location Indoor use only
Ambient temperature 5 to 40 C
Humidity 10 to 70 % (no condensing)
Min. Entrance
dimensions
1540 mm (W) x 2100 mm (H)
Min. Ceiling Height 2400 mm (H)
Min. Footprint
(incl. Fence)
4050 mm (L) x 2900 mm (W)
Min. Floor Loading 310 kg/m
2
Cleanliness Free of dust and debris
l Never install the game machine outdoors
Also avoid the following locations even though they are indoors.
l
Near a leaky roof, close to any kind of dripping water, or any place with high
humidity that can condense
l Close to an indoor pool or showers
l Exposed to direct sunlight
l Exposed to direct heat, such as close to a heater vent, or in a highly heated
room
l Close to flammable or volatile chemicals, or dangerous materials
l Avoid floors that slope(any slope more than 2 degrees)
l Avoid strong vibrations
l Avoid dusty locations
l Avoid any location that does not allow enough space around the machine