Simuline Cycraft - 4 Transporting and Moving; Equipment Required for Unloading and Transport; Unloading and Opening the Crate

Page 19
4. TRANSPORTING AND MOVING
4.1 EQUIPMENT REQUIRED FOR UNLOADING AND TRANSPORT
No Equipment Description Qty Purpose
1 Fork Lift Capacity over 1500 kg
Boom attached fork
1 Lift and transport out of
packing crate.
2 Wood block 10 cm x 10 cm x 100 cm 4 Set under the base
frame so that fork can
be inserted and
removed easily.
3 Rear caster
(Supplied)
2 Used together with front
casters (already
installed) to roll the
machine to destination
location.
4 Socket wrench &
Extension bar
(Over 200 mm)
1 Attaching the rear
casters.
5 Wrench 1 Adjusting the level of
casters.
6 Philips type
screwdriver
1 Loosening and
securing
truss bolts
7 Bolt Hex head M12 x 35 L 6 Attaching the casters
4.2 UNLOADING AND OPENING THE CRATE
1) When unloading the crate from the container or truck, it is recommended to insert
the forklift from the heavier rear side of the crate.
2) The crate should not be opened from the front. Open the rear and/or one of the
sides when opening the crate.