Sinoboom 1323RE - Lifting the Machine with a Crane

© Jun. 2021 8-2 1323RE&1623RE Operation Manual
TRANSPORTING AND LIFTING THE MACHINE
Figure 8-2
NOTICE
Retract the extension platform to secure it to the slot,
and ensure the extension platform will not extend or
shake out from the main platform during transport.
LIFTING THE MACHINE
WITH A CRANE
Follow these requirements when lifting the machine by
crane:
1. Fully lower the platform. Keep the platform down
during transportation.
2. Ensure the extension platforms, controllers and
chassis components are adequately securely in
place.
3. Remove all loose items from the machine.
4. Determine the center of gravity of the machine.
Figure 8-3
Table 8-1
Models X Y
1323RE
1388 mm
(54.6 in)
1078 mm
(42.4 in)
1623RE
1528 mm
(60.2 in)
946 mm
(37.2 in)
5. Only connect the rigging to the designated lifting
points on the machine. Adjust the rigging to avoid
damaging the machine and to keep the machine
horizontal.
NOTICE
To protect the platform guardrail, choose the
appropriate length of rigging.
X
Y