DECALS/NAMEPLATES INSPECTION
1323RE&1623RE Operation Manual A-9 © Jun. 2021
REPAIR & INSPETION REPORT
Inspector Company
Notes:
1. The Repair & Inspection Report shall include the inspection table of each regular inspection.
2. Duplicate the Repair & Inspection Report for each inspection. Store the completed tables for 10 years or
until the machine is no longer in use or as required by machine owner/company/custodian.
3. Use the following table to note the results. After each section is complete, mark the appropriate box.
4. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re-
inspected after repair is completed and marked in the box marked "inspection". Select the appropriate
inspection procedure based on the inspection type.
Select the procedures as appropriate for the type of inspection.
To Next Page
Loading...
