© Mar 2021 7-8 GTJZ0608E&0808E Operation Manual
OPERATING THE MACHINE
2. Pull out the emergency stop button on platform
controls to ON position.
3. Pull out the emergency stop button on ground
controls to ON postion, and hold the Enter key on
the platform display for 5s until the setup screen
shows.
4. Press the Down key to scroll to “Set Option”, and
then press the Enter key.
5. When the display shows “In or Out door”, press the
Enter key.
6. The display will then show the two mode options
—“In Door” and “Out Door”.
7. Press the Up Or Down keys to select the desired
mode.
8. Select the “In Door”, and press the Enter key, the
indoor mode is sucessfully set up.
9. Or select the “Out Door”，and press the Enter key,
the indoor mode is sucessfully set up.
To Next Page
Loading...
