Why is the operation of the lower platform invalid on my Sinoboom Boom Lift?
If the operation of the lower platform is invalid on your Sinoboom Boom Lift, it could be because the key switch has not been turned to the operation of the lower platform. Ensure the key switch is placed on the base frame control position. Also, check if the system has not been powered off after the program was downloaded to the lower platform controller.
What to do if the parameters on my Sinoboom Boom Lift could not be saved successfully after several trials?
If the parameters on your Sinoboom Boom Lift cannot be saved successfully after several trials, it could be because the storage is abnormal. This could be due to the parameters crossing the line or the lower platform controller being abnormal.
What to do if the lower platform of my Sinoboom Boom Lift could not be lifted when it is no-load, at the lowest position and is level?
If the lower platform of your Sinoboom Boom Lift cannot be lifted when it is no-load, at the lowest position, and level, it could be due to incorrect height calibration or a problem with the lifting valve. * Inspect whether the on-off input plug is inserted properly or firmly. * Inspect whether the wiring of the plug switch is abnormal. Also, re-calibrate the height. Inspect whether the connection of the lead of the lifting valve is wrong, and whether the lifting valve is abnormal.
What to do if the lower platform of my Sinoboom Boom Lift could not be lowered when it is no-loaded and level?
If the lower platform of your Sinoboom Boom Lift cannot be lowered when it is no-loaded and level, the lowering valve may have trouble. Inspect whether the on-off input plug is inserted properly or firmly. Inspect whether the wiring of the plug switch is abnormal. Inspect whether the connection of the lead of the lifting valve is wrong, and whether the lowering valve is abnormal.
What to do if the platform of my Sinoboom Boom Lift could not be lifted to the maximum position when it is no-load indoors?
If the platform of your Sinoboom Boom Lift cannot be lifted to the maximum position when it is no-load indoors, it may be because the height has not been calibrated or the travel switch is incorrect. Re-calibrate the height and change the setting calibrate of the travel switch.
What to do if the platform of my Sinoboom Boom Lift could not rise up further after reaching certain position?
If the platform of your Sinoboom Boom Lift cannot rise up further after reaching a certain position, the travel switch setting might be incorrect. Inspect the travel switch and line.
Explains safety alert symbols and hazard levels for danger, warning, and caution.
Details the importance and process of reporting accidents promptly to the manufacturer.
Safety precautions related to electrical hazards and safe distances from conductors.
Maintaining safe distances from power lines and electrical equipment.
Guidelines to prevent tipping and manage platform load capacity for stability.
Identifies hazards associated with jobsite conditions, terrain, and environment.
Common unsafe practices and their consequences during machine operation.
Safety measures and precautions to prevent falls from the platform.
Preventing collisions with surroundings or other objects while moving.
Precautions to avoid crushing injuries during machine movement and operation.
Safety measures related to flammable atmospheres and battery handling.
Risks associated with operating a damaged or malfunctioning machine.
General safety guidelines for preventing bodily harm during operation.
Safety precautions for handling, charging, and maintaining batteries.
Risks of battery acid spills and necessary immediate precautions.
Safety guidelines and requirements before performing welding or polishing.
Specific hazards and procedures for welding operations on the machine.
Step-by-step procedure for safely shutting down and securing the machine.
Following safety rules and inspecting the machine and worksite before operation.
Adhering to safety rules and understanding machine operation before use.
Modifying aerial platforms or adding devices that affect stability.
Requirements for pre-operation checks, including manuals, labels, and parts.
Checking for damaged, loose, or modified parts on the machine.
Inspecting the machine for structural integrity, damage, and completeness.
Ensuring proper hydraulic oil level for machine operation and longevity.
Checking the battery charge level for safe and effective operation.
Steps to prepare for function tests, including selecting a safe area.
Testing all functions of the ground control system.
Ensuring the work area is clear of persons before operating the boom.
Testing all functions of the platform control system.
Verifying the machine's drive speed under different conditions.
Procedures for testing emergency lowering functions.
Testing the mast emergency lowering mechanism.
Testing the jib boom emergency lowering mechanism.
Verifying the functionality of the pothole protection system.
Checking the machine's tilt protection system.
Testing the 3-degree level switch functionality.
Testing the 7-degree level switch functionality.
Verifying capacity and overload detection of the weighing system.
Following safety rules and operating procedures for safe machine use.
Understanding machine stability conditions and tipping hazards.
Procedures for activating the emergency stop function on platform or ground controls.
Actions to take when the operator cannot control the machine.
Emergency control procedures for malfunction or power loss.
Guidelines for safely towing or dragging the machine in emergencies.
Safety precautions during transport and lifting operations.
Procedures and requirements for lifting the machine using a crane.
Steps for safely transporting the machine by truck or trailer.
Following proper maintenance procedures to prevent injury or damage.
Recommended intervals and tasks for routine machine maintenance.
Procedures for pre-delivery inspections and required documentation.
Forms and guidelines for recording maintenance inspection results.
Importance of legible safety decals for hazard awareness and operation.
Illustration and list of safety decals for the GB standard.
Illustration and list of safety decals for the CE Metric standard.
Illustration and list of safety decals for the CE Imperial standard.
Illustration and list of safety decals for the ANSI standard.
Visual guide to symbols used in the manual and their meanings.
Form for recording pre-delivery inspection and maintenance results.
Report template for tracking maintenance and inspection activities.
General| Model | GTTZ10EJ |
|---|---|
| Platform Capacity | 230 kg |
| Weight | 3300 kg |
| Drive Type | Electric |
| Max Slope | 25% |
| Overall Width | 1.2 m |
| Gradeability | 25% |
| Drive Speed (Stowed) | 4.5 km/h |
| Drive Speed (Raised) | 0.8 km/h |
| Tyres | Non-marking |
| Drive System | Electric |
To Next Page
