© Mar. 2022 1-2 GTTZ10EJ Operation Manual
MACHINE SPECIFICATIONS
Table 1-1 GTTZ10EJ Specifications (continued)
Items
ML10EJ (METRIC) ML270EJ (IMPERIAL)
Turntable slewing angle / continuity
345° / incontinuous
Drive mode (drive×steer)
2WD×2WS
Max allowable side force (indoor /
outdoor)
400N / 200N 90 lbf / 45 lbf
Max operating noise level
72 dB
POWER PARAMETERS
Drive×Steer 2 WD×2 WS
Power unit motor (voltage/power)
24 V DC/4 kW
Hydraulic tank capacity
8 L
1.8 gal (imperial) / 2.1 gal (US)
Hydraulic system pressure
15 MPa
2175 psi
Battery (voltage, capacity, rate of
discharge)
24 V, 240 Ah, 20hr
Power system voltage
24VDC
System control voltage
24VDC
Charger (input voltage/output
current)
100～240 V AC/30 A
Drive motor (voltage/power)
24 V DC/0.85 kW
FLOOR LOADING INFORMATION
Max tire load
1200 kg
2646 lb
Pressure against ground
1180 kPa
171 psi
ENVIRONMENT REQUIREMENT
Max allowable wind speed (indoor/
outdoor)
0 m / s / 12.5 m / s
0 mph / 28 mph
Max allowable altitude 1000 m 3281 ft
Allowable ambient temperature
(lead-acid battery)
-10℃～40℃ 14℉～104℉
Allowable ambient temperature (-
lithium battery)
-20℃～40℃ -4℉～104℉
Max allowable RH
90%
Storage environment
Stored at -20℃ to 50℃ (-4℉ to 122℉) in a well-ventilated environment with
90% relative humidity (20℃ [68℉]), and away from rain, sun, corrosive
gas, inflammables and explosives.
WEIGHT
To Next Page
Loading...
