GTTZ10EJ Operation Manual 3-1 © Mar. 2022
3 SAFETY
Read, understand and comply with the safety rules and
regulations of your workplace and your government.
Before using the machine, ensure the operator is prop-
erly trained and qualified in safely operating the ma-
chine. The training includes but is not limited to：
• Warning and instruction decals on the machine
• Pre-operation inspection
• Any factors that may affect the machine stability
• Common hazards and countermeasures
• Jobsite inspection
• Functions of all controls and associated knowledge,
including emergency control.
• Personal protection equipment that suits the task,
workplace and environment.
• Safety operation
• Transporting the machine
• Measures against unauthorized use
• Operating instructions
Understand that as the operator you have the responsi-
bility and right to shut down the machine in case of fail-
ure with the machine or other emergency at your
workplace.
NOTICE
People suffering from heart disease, hypertension,
epilepsy and other diseases and people who fear
heights must never operate or use this machine. Al-
so, people who have alcohol or drugs in their system,
or experience excessive fatigue or depression, are
prohibited from operating or using this machine.
SAFETY DEFINITIONS
This safety alert symbol appears with
most safety statements. It means atten-
tion, become alert, your safety is in-
volved! Please read and abide by the
message that follows the safety alert
symbol.
Indicates a hazardous situation that, if not
avoided, will result in death or serious injury.
Indicates a hazardous situation that, if not
avoided, could result in death or serious injury.
Indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation that can cause damage to the
engine, personal property and/or the environment, or
cause the equipment to operate improperly.
NOTE: Indicates a procedure, practice or condition that
should be followed in order for the engine or component
to function in the manner intended.
REPORTING ACCIDENTS
In case of any accident involving the machine of Hunan
Sinoboom Intelligent Equipment Co., Ltd., notify Hunan
Sinoboom Intelligent Equipment Co., Ltd. immediately,
even if no personal injury or property damage occurs in
the accident. Contact Hunan Sinoboom Intelligent
Equipment Co., Ltd. by telephone and provide all nec-
essary details. Failure to notify the manufacturer within
48 hours of the incident involving the machine of Hunan
Sinoboom Intelligent Equipment Co., Ltd. may void the
product's warranty.
NOTICE
Thoroughly inspect the machine and all its functions
after any accident. Make sure to test it first from the
ground controller and then from the platform control-
ler. Ensure the machine's lifting height does not ex-
ceed 3 m (9.8 ft) until all damage has been repaired
and all controllers operate properly.
To Next Page
Loading...
