MAINTENANCE
GTTZ10EJ Operation Manual 9-5 © Mar. 2022
PREPARE THE WORK RECORD BEFORE DELIVERY
Functional Inspection
Machine Buyer/ Renter
Inspector Signature
Inspector Title
Inspector Company
MAINTENANCE
INSPECTION REPORT
1. The maintenance Inspection Report includes check
items for each type of inspection.
2. Duplicate the Maintenance Inspection Report for
each inspection. Store the completed tables for 10
years or until the machine is no longer in use or as
required by machine owner/company/custodian.
3. Use the following table to note the results. After
each item is complete, mark the appropriate box.
4. If any inspection results are "NO", the machine
must be stopped and re-inspected after repair is
completed and the box marked “REPAIRED” shall
be checked. Select the appropriate inspection
procedure based on the inspection type.
Table 9-3
MAINTENANCE INSPECTION REPORT
Model
Serial No.
Daily/pre-operation
YES/Machine is in
Good Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has Been
Repaired
Problem
Description
Boom components
Inspect retracting wire
rope
Electrical and hydraulic systems
Inspect hydraulic oil level
Inspect battery level
Functions and controls
Inspect ground controls
Inspect platform controls
Inspect emergency
lowering
Inspect drive speed
Inspect pothole protection
Inspect tilt protection
Inspect brake system
To Next Page
Loading...
