© Mar. 2022 3-6 GTTZ10EJ Operation Manual
SAFETY
UNSAFE OPERATION
HAZARDS
The machine must be operated in strict compliance with
the requirements as contained in the Operation Manual
and the Maintenance Manual, as well as the applicable
industry or local regulations, whichever is more
stringent.
Do not use the machine in the following situations:
• Unrelated personnel/equipment is present in the
working envelope of the machine.
• Use as a crane (except the custom-made ones with
such functions).
• Use on the truck, trailer, tracked vehicle, ship,
scaffold and the like without written consent by the
manufacturer or a qualified professional.
• Improper securing of the machine to another object
by just sitting it against, fastening or binding.
• Stunt or imprudent use of the machine.
• Overloaded or over-moment situation.
• Other situations as specified in the Operation
Manual and the Maintenance Manual.
UNSAFE OPERATION HAZARDS
• Do not push any object outside
the platform. The maximum
side force allowed is 400N (90
lbf) for indoor use and 200N (45
lbf) for outdoor use.
• Tow the machine only from the
tie-down/lifting points on the
chassis.
• Never use the mast/boom or
platform to stabilize or support
any objects outside of the
machine.
• Do not modify any component
that may affect the machine
safety and stability.
• Do not replace key parts that
affect machine stability with
parts of different weights or
specifications.
• Do not change or modify
moving aerial platforms without
the manufacturer’s written
permission.
• On the platform, do not attach
an additional device for placing
tools or other materials to the
guardrail. This will increase the
platform weight, surface area
and load.
• Do not put ladders or
scaffolding on the platform or
any part of this machine.
• Do not use additional devices
to increase the working height
of the machine.
• Do not use the machine on any
mobile or movable surface or
vehicle. Ensure all tires are in
good condition, the slotted nuts
tightened and the cotter pins
complete.
• Do not use a battery that
weighs less than the original
one (30kg [66 lb]), and do not
remove or modify the
counterweight or other parts
inside the battery box. The
battery not only provides
power, but also serves as a
counterweight. The battery is
vital to maintaining the stability
of the machine.
To Next Page
Loading...
