4
22. Have your tool repaired by a qualified person
This electric tool complies with the relevant safety
rules. Repairs should only be carried out by qualified
persons using original spare parts, otherwise this
may result in considerable danger to the user.
4.3 Symbols used throughout these instructions
Danger!
Indicates risk of personal injury or severe material
damage.
Risk of electric shock!
Risk of personal injury by electric shock.
Drawing-in/trapping hazard!
Risk of personal injury by body parts or
clothing being drawn into the rotating saw
blades.
Caution! Risk of material damage.
Note: Supplementary information.
4.4 Safety devices
Blade guard
The blade guard (a) protects against unintentional
contact with the saw blade and from chips flying about.
Always have blade guard installed during operation.
Riving knife
The riving knife (b) prevents the work-piece from being
caught the rising teeth of the saw blade and being thrown
against the operator.
Always have blade guard installed during operation.
Push stick
The push stick (p) serves as an extension of the hand and
protects against accidental contact with the saw blade.
Use push stick if distance rip fence – saw blade is≦
120mm. In order for the push stick to be always at hand, it
can be stored in a sheath inside the machine’s housing.
5. unpacking
Note: make sure all items are accounted for before
discarding any packaging material.
Warning: to avoid injury, if any parts are missing, do not
attempt to assemble the machine, do not plug in the
power cord, do not turn the switch on until missing parts
are obtained and installed correctly.
6. Special product features
All operating elements are located at the machine’s front.
Mitre fence and rip fence are standard delivery.
7. Operating elements
ON / OFF switch with emergency stop
z To switch ON = press green button
z To switch OFF = press red button or switch cover.
To Next Page
Loading...
Need help?
General
