Note:
1. If you want to add a camera through the Internet, you
must key in a physical IP Address.
2. When the camera is installed behind Gateway and the
Open Second Port of camera/Port Forwarding of
Gateway function is enabled, the Gateway IP address
has to be entered with the Port Number as below:
3. At the same time, the Gateway IP address can be
replaced by URL as below:
4. If you forget the IP Address that you want to add, a
dialog box will appear to notify you of the error.
If you are unsure of the IP Address of the camera, you
can click the “Browse” button, the Browse Camera
57
To Next Page
Loading...
