dialog box will appear with a blank screen as illustrated
below.
You must select the camera and click the “Add” button
to add a new camera. The Add Camera dialog box will
appear once again with the IP Address entered. Click the
“Add” button, and the camera will be automatically
added into IPView SE list view format.
If the Login Camera dialog box appears, make sure to
enter the correct User Name and Password and click
the “OK” button. Then, the camera will be added into
IPView SE in list format. If the User Name and
Password is entered incorrectly, the camera will not be
added into IPView SE.
58
To Next Page
Loading...
