MK15E User Manual V1.1
51
2022 SIYI Technology, All Rights Reserved
Mark
If the joysticks do not stay in middle (coordinates are not (0, 0)) or do not output
maximum/minimum value (-100 or 100), you shall calibrate them immediately.
3.8 Dial Calibration
Dial calibration function help users calibrate both dials’ middle positions and
maximum/minimum positions. Regular calibration helps maintain control accuracy
of the dials.
Steps
1. Before calibrating the dials, please make sure that both dials are naturally
standstill, not displaced by any force.
2. In “Dial Calibration” page, touch “Start”, the page shows as below.
To Next Page
