MK15E User Manual V1.1
65
2022 SIYI Technology, All Rights Reserved
3. In “SIYI TX” app, go to “Status” page to check connection status between MK15E
transmitter and MK15E Air Unit. When connection is normal, data “download” is
not 0. If it is “0”, please go back to check step 1 and 2.
4. Then go to “Datalink” page and check:
⚫ If “Connection” port is correct?
⚫ If “Flight Controller” model is correct?
⚫ If “Baud Rate” is correct when you use customized flight controller.
5. In your GCS, check if “Datalink” port is correct.
Mark
If you have done investigation by following all steps above, but the reason is still not located,
please contact your dealer or SIYI immediately.
To Next Page
Loading...
