7
Note: If the system alignment failed, go to the Troubleshooting section of this manual for possible
causes and solutions.
6. Remove the Alignment Board and store it in a safe place for future use. You are now ready to begin
scanning!
Updating the Size Stream Body Scanner Software
The scanner comes from our factory with the software pre-installed. Size Stream periodically releases
updates for the scanner software to improve measurement quality and user experience. Please check the
Size Stream Knowledge Base for release notes with more details about what changes are included in the
latest software updates.
When connected to the Internet, the software will automatically check and download updates for the
system. The software will alert the user when an update is ready to apply and allow the user to choose when
to apply the update. Please note the software will prompt the user to apply the update at start up, system
alignment time, or manually by using the “Update” button on the Utility menu.
If an internet connection is not available, a manual update installer is available upon request. Please contact
support@sizestream.com
for more information.
To Next Page
Loading...