PRODUCT SPECIFICATIONS
Product labelling
SKF Multilog On-line System IMx-16Plus
User Manual
Revision Letter A
3 Product specifications
3.1 Product labelling
On the front face of the case a manufacturing data label, Figure 18, confirms product
and company information, CE marking, WEEE marking and RoHS compliance. The
QR code contains the product information shown alongside it.
Note the same MAC address applies to whichever of the local network interfaces is
enabled (RJ45 or Wi-Fi).
Figure 18 Manufacturing data label
Refer to
3.2.12 (detailed product specifications) for a complete listing of compliances
and certifications.
To Next Page
Loading...