PRODUCT SPECIFICATIONS
Product labelling
SKF Multilog On-line System IMx-8/IMx-8Plus
User Manual
Revision E
3 Product specifications
3.1 Product labelling
On the front face of the case a manufacturing data label, Figure 17 or Figure 18,
confirms product and company information, CE marking, WEEE marking and RoHS
compliance. The QR code contains the product information shown alongside it.
Note that for the IMx-8Plus, the same MAC address applies to whichever of the local
network interfaces is enabled, RJ45 or Wi-Fi.
Figure 17 Manufacturing data label – IMx-8 example
Figure 18 Manufacturing data label – IMx-8Plus example
Refer to the detailed product specifications, 3.2.12 and 3.2.13, for a complete listing
of compliances and certifications.
To Next Page
Loading...
