SKF IMx-8 User Manual

PRODUCT SPECIFICATIONS
SKF Multilog On-line System IMx-8/IMx-8Plus
50 (63)
SKF Multilog On-line System IMx-8/IMx-8Plus
User Manual
Revision E
o FCC Part 15B 107/109, ICES-003, FCC Part 15C 15.247 (d),
RSS-447 sect. 5.55.5
o FCC Part 22H 917/RSS-132 sect. 5.5, FCC Part 24E 328/RSS-133,
FCC Part 25.53(h)/RSS-139
FCC compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide a reasonable protection against harmful
interference in an industrial installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and uses in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Certification detail for the cellular module
FCC Identifier: QIPPLS62-W
Industry Canada Certification Number: 7830A-PLS62W
Granted to Gemalto M2M GmbH
* The integration is limited to fixed or mobile categorized host devices,
where a separation distance between the antenna and any person of min.
20 cm can be assured during normal operating conditions.
Certification detail for the Wi-Fi module
ATWINC1500-MR210UB
United States/FCC ID: 2ADHKATWINC1500U

SKF IMx-8 Specifications

General

Brand	SKF
Model	IMx-8
Category	Control Systems
Language	English