SKF KFG - Accessories; Connectors and External Control Units

Page 111
EN
17. Accessories
Accessories
Description Data Order No.
M12x1 circular connector, 4-pin,
with cable for connecting to pis-
ton detector and an external fault
indicator
Cable set
Two-way distributor (for connecting to the M12x1 plug on the pump with 2x M12x1 outputs
for piston detector and separate indicator lamp)
179-990-719
179-990-700
M12x1 plug without cable, with 4 pins, protection class IP 67 (mounted) 179-990-371
M12x1 angle plug without cable, with 4 pins, protection class IP 67 (mounted) 179-990-372
M12x1 plug, straight with 5 m cable, 4x 0.25 mm
2
, protection class IP 68 (mounted) 179-990-600
M12x1 angle plug with 5 m cable, 4x 0.25 mm
2
, protection class IP 68 (mounted) 179-990-601
Cable socket
according to DIN 43 650
Type A (ISO 4400), pivoted, without LED, 1.5 mm
2
, line diameter 6 mm to 9 mm 179-990-034
Cable socket
according to DIN 43 650
Type A (ISO 4400), pivoted, without LED, 1.5 mm
2
, line diameter 4.5 mm to 7 mm 179-990-034
Cable socket
according to DIN 43 650
Type A (ISO 4400), pivoted, with red LED, 1.5 mm
2
, line diameter 6 mm to 9 mm 179-990-121
Additional data and electrical plug-in connections are available in brochure No. 1-1730,
"Electric Plug-and-Socket Connectors."
17. Accessories
KFGS
KFG
KFGC