EasyManua.ls Logo

SKF MAX-1-2-24-X-R-V2 - Operation; Operation of the Pumping Centre; Commissioning

SKF MAX-1-2-24-X-R-V2
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
4.2.1 Connections
Lubricant connections:
" lubricant outlets (1 or 2 pcs; line 1 out, line 2 out), G3/8”, hose Ø 12 mm or Ø 1/2” (L1, L2)
" pressure inlet from the pump (G3/8), DIN 2353 shear ring coupling for a Ø 12 mm pipe (P)
" tank outlet for the pump (G3/8), DIN 2353 shear ring coupling for a Ø 12 mm pipe (T)
Compressed air connections:
" compressed air supply from the pressure air regulator to the changeover valve unit, (G1/8) pin plug ø8 mm (A1)
" compressed air supply for the pump, (G1/8) pin plug ø8 mm (A2)
" exhaust air outlet (A3)
Electrical connections:
" pumping centre 2 or shut-off valve (2 pcs), connector M12 (S) (M14x1)
" low level switch, female connector M12 (D) (M14x1)
" pressure control (2 pcs), connector M12 (P1/channel 1, P2/channel 2) (M14x1)
" power supply, cable bushing M20 x 1.5 1 pcs
" accessories (e.g. external alarm, interlocking), M16 x 1,5 cable sleeve, 4 pcs, cable ø4–10 mm
Fig. 4 Maxilube connections
Fig. 5 MPB connections

Table of Contents

Other manuals for SKF MAX-1-2-24-X-R-V2

Related product manuals