EasyManua.ls Logo

Ski-Doo Summit - Operating Instructions

Ski-Doo Summit
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
102
Check operation of tether and engine cut-out switches, ignition
switch (fan-cooled models only), headlight switch (HI-LO), taillight,
brake light and pilot lamps.
Verify that skis and steering operate freely. Check corresponding
action skis versus handlebar.
Check fuel and injection oil for levels and leaks. Replenish as nec-
essary and see an SKI-DOO authorized dealer in case of any leaks.
Open or close heated carburetor valve according to outside tem-
perature.
Verify that air filter(s) is(are) free of snow, if so equipped.
All storage compartments must be properly latched and they must
not contain any heavy or breakable objects.
WARNING
Throttle lever must operate easily and smoothly. It must re-
turn to idle position when released.
WARNING
All adjustable features should be positioned at optimal setting.
Securely tighten all adjustment locks.
Mmo2003-003a.book Page 102 Tuesday, March 19, 2002 2:22 PM

Table of Contents

Related product manuals