135
Retighten wheel screws to 48 N•m (35 lbf•ft).
TYPICAL
1. Retighten to 48 N•m (35 lbf•ft)
Restart engine and rotate track slowly to recheck alignment.
Reposition snowmobile on ground.
Steering and Front Suspension Mechanism
Visually inspect steering and front suspension mechanism for tight-
ness of components (steering arms, control arms and links, tie rods,
ball joints, ski coupler bolts, etc.) If necessary, contact an authorized
SKI-DOO dealer.
WARNING
Properly tighten wheel screws, otherwise wheel may come off
and cause track to “lock”.
1
A32F1DA
Mmo2003-003a.book Page 135 Tuesday, March 19, 2002 2:22 PM
To Next Page
Loading...
