37
With the snowmobile completely stopped and engine running at idle,
press and release the RER button.
1. RER button
The RER pilot lamp will blink and a warning buzzer will sound when
the snowmobile is engaged in reverse.
Apply throttle slowly and evenly. Allow drive pulley to engage then
accelerate carefully.
Shifting in Forward
With the snowmobile completely stopped and engine running at idle,
press and release the reverse button.
RER pilot lamp and warning buzzer will stop.
Apply throttle slowly and evenly. Allow drive pulley to engage then
accelerate carefully.
1
A32E1BA
Mmo2003-003a.book Page 37 Tuesday, March 19, 2002 2:22 PM
To Next Page
Loading...
