96
6. Rear Shock Motion Ratio — Damping Strength
Some Models Only
Rear shock motion ratio can be adjusted according to driver and pas-
senger weight and/or trail condition.
There are two adjustment positions.
1. Soft position
2. Firm position
To adjust, remove nut, move bolt to desired position. Install a new
nut and torque it to 24 N•m (18 lbf•ft).
7. Air Shock Absorber — Comfort and Ride Height
Some Models Only
After all adjustments are performed, rear air shock absorber can be
adjusted as necessary. Use the console mounted switch.
2
A32F30A
1
Mmo2003-003a.book Page 96 Tuesday, March 19, 2002 2:22 PM
To Next Page
Loading...
