Skipper ESN100 - Page 4

Page 4 of 56
SKIPPER Electronics AS
Edition: 2021-09-16
ESN100 Operation and Installation Manual
Table of abbreviations
Symbol/abbrevia-
tion
Explanation
TVG Time variable gain
FWD Forward position
AFT A position
Pic Speed Picture speed. e amount of time presented on the screen
DBT Depth below transducer
DBS Depth below surface
DBK Depth below keel
Dra Depth from water surface to the lowest point of the vessel
Oset Distance from Transducer to the lowest point of the vessel
M Meters
 Feet
m Fathoms
m/s Speed in meters / second
kHz kilohertz (Frequency)
(A) Automatic mode ( system self adjusts range and gain)
ALF Alarm method according to IEC61924 / MSC 302 with category (CAT)
A - Alarm to be acknowledged on the display only
B – Alarm may be acknowledged remotely
To work with ACN – Alarm Acknowledge, request, transfer, silence
ALR Older alarm standard to work with ACK Acknowledge
Active Alarm/Warning unacknowledged alarm
Active Alarm/Warning acknowledged Alarm
Alarm/Warning rectied but unacknowledged
Alarm/Warning responsibility transferred
Alarm/Warning silenced for 30 seconds
Simulate mode
Mute Mode (see options section)