Skoda Octavia III 2013 User Manual

7 - Hall sender - G40-
❑ installing and removing ⇒ “1.4 Removing and installing Hall sender G40 ”, page 284
8 - O-ring
9 - Rotor
❑ for engine speed sender - G28-
❑ cannot be removed separately, only with sealing flange Pos. -10-
10 - Sealing flange on the gearbox side
❑ installing and removing ⇒ “2.3 Removing and installing sealing flange on gearbox side”, page 49
11 - Engine speed transmitter - G28-
❑ installing and removing ⇒ “1.5 Removing and installing engine speed sender G28 ”, page 284
12 - Bolt
❑ 5 Nm
1.2 Removing and installing ignition coils
with output stage
Special tools and workshop equipment required
♦ Extractor -T10530-
Removing
Ignition coils “cyl. 2, 3, 4”
– Loosen hose clamps -1- and -2- and remove air guide pipes.
Continued for all ignition coils
– Disconnect plug connection -2-.
– Unscrew screw -1-.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
282 Rep. gr.28 - Ignition system
ProCarManuals.com

Skoda Octavia III 2013 Specifications

General

Brand	Skoda
Model	Octavia III 2013
Category	Automobile
Language	English