DA 2000
32 Technical User Guide
7.4 Storage/frost protection
The high-pressure cooling pump must be placed in a frost-free location.
1. Remove the water supply and start the pump.
2. Let the pump run for approx 1 min. until it is emptied of water.
If, by accident, the high-pressure cooling pump freezes up, do not start it. Thaw the pump and auxiliary equip-
ment before starting the system.
7.5 Cleaning
Clean the product with a cloth that has been wrung out almost dry in water and avoid using:
• high-pressure cleaner
• solvents
• corrosive/caustic agents
7.6 Recycling/Disposal
Products suitable for recycling are marked with a pictogram.
It must be possible for customers to deliver the products to local collection sites/recycling stations in accordance
with local instructions. The recycling station will then arrange for further transport to a certified plant for reuse,
recovery and recycling.
To Next Page
Loading...