Sky Control SC8100 - SMS and SNMP Notifications

33
Quick Conguration
To create notication via e-mail you have to
specify the following parameters:
To create notication via SMS you have to speci
-
fy the following parameters:
The text of the message can include macros.
Macros have the following form:
%{number of macro}
When notication is created the system re-
places the macros variables with actual values.
The following macros are available:
Contact your mail administrator for assistance
with conguring SMTP parameters or the help
section of your e-mail provider.
Notication via SNMP Trap
Notication via SMS
Macros in the notication text
Parameter Description
SMTP port
SMTP server on the cor-
rect port number. (e.g. 25
or 465)
Login,
Password
SMTP server username
and password
Mail from
Sender’s e-mail address
(sky25test@gmail.com)
Mail to
Recipient’s e-mail address
(sky25test@gmail.com)
Message Text of the message
Parameter Description
Name
The name of the element
in the system
SNMP server
Name or SNMP server IP
address (192.168.1.10)
SNMP port SNMP port (usually 162)
Community Community name (public)
Version Version (v1 or v2c)
Parameter Description
Name
The name of the element in
the system
Phone number
Phone number of receiver
(+421908315000)
Message Text of the message
Macro Description
%1 description of the logic
%2
sensor data which are included in
the logic scheme
%3 logic scheme response time
%4 name of logic scheme
%5
name of the sensor which triggered
the logic scheme
%6
state of the sensor in the logic
scheme that has triggered
%7
the value measured by the sensor
or logic level