Sky Control SC8100 - GSM Modem and SMS Setup

37
Quick Conguration
Managing keys
To edit or delete keys in the key database, go to
“Preferences”, select “Access control”, select the
user and click “Edit” or “Delete”. Save.
If necessary, the existing key database can be
saved into a le. This le can be used to create
new database in another device or to restore
the old database. Go to “Preferences” select
“Access control”, select “Download users data-
base” or “Upload users database”.
Conguring GSM modem
Before GSM modem can be used, you have to
ll in the elds in the GSM modem properties
window. Go to “GSM Modem” >> “Edit” >>
“Edit GSM modem”:
• Name – the name of GSM modem, “GSM
Modem” by default;
• PIN – PIN code of SIM card. This eld can
be empty if PIN code is deactivated on SIM
card;
• SMS Center – the number of SMS centre.
At connection the number is read from the
SIM card. After editing the changes are
saved on SIM card;
• Allowed numbers – the list of numbers
that are allowed to send SMS commands.
SMS commands from any other number
will not be executed. The number must
begin with a “+”.
Fields describing the status of GSM modem:
• IMEI – unique number that identies the
GSM modem;
• State – the state of GSM modem;
• not connected – GSM modem is not
connected;
• low – GSM modem is initiating or dis-
connecting;
• normal – GSM modem is ready to send
SMS;
Setting up GSM modem
GSM modem is used to send sms-notications
and to receive sms-commands.
• warning
– occurence of a one-time error
that does not affect the overall operation
of the GSM modem;
• alarm
– occurence of error that does not
allow further operation of GSM modem.
• Network status – network status:
• registered in Operator – registered in
network Operator;
• registered – registered in network;
• not registered – not registered in home
network;
• registration denied – registration in
home network is denied.
• GSM status – general status of GSM mo-
dem:
• not found – GSM modem is not found;
• found, not ready – GSM modem is found
but is not ready for operation;
• found, ready – GSM modem is found
and is ready for operation. In addition,
this eld shows errors that occur dur-
ing operation of GSM modem e.g.error
sending SMS.
• Signal strength – the level of signal,
values range from 0% to 100%.
To save the settings press “Save”. In order to
avoid repeating the procedure every time you
connect monitoring system, the settings should
be saved in the ash memory of the system.
Go to “ System menu” >> “Save settings to
ash”.
SMS notications
To add recipient of SMS notication go to “Add”
>> ”Add Mailer SMS”:
• Name – name of notication. Can be
random ( name, recipients position etc.) ,
“SMS” by default;
• Phone number – the recipients phone
number. The number must begin with a
“+”.
• Message – the text of the message, can
be in any language. The length of the mes
-
sage which contains latin characters is max
160, cyrillic characters - 70. If the length
of the message exceeds this limit the SMS