Introduction
Product description
Sky Control appliances - monitoring units
SC8100, SC8110, SC2100 and SC2110 - are
the main Sky Control modules for monitor-
ing and environmental control. SC8100 and
SC8110 are used for IP monitoring or as a video
server for different premises, whereas SC2100
and SC2110 are used for small premises.
Main monitoring systems cannot not be con-
nected to each other. Instead, to increase the
number of sensors and appliances, extension
units (SC408) and embedded modules (SC16,
SC920) can be used. Each module has embed-
ded software and provides access to a system
via a browser using the IP address. The systems
support SNMP protocols, if you need to collect
all master modules data in one interface, you
can use a third-party SNMP software.
Document overview
The Installation and Quick Conguration Manual
describe how to install Sky Control main mod-
ules SC8100, SC8110, SC2100, SC2110 as well
as how to connect the module and to congure
the network settings. It shows how to connect
and use extension module SC408 and how
to mount and use embedded modules SC16,
SC920. After performing conguration proce-
dures described in this manual, you can access
the system from Firefox, Safari and Chrome
browser, perform additional conguration tasks
and begin to monitor the environment.
Analog sensors
Current loop converter
4-20 mA (SC420)
Temperature sensor
(SC500)
Outdoor temperature
sensor (SC501)
Related documents
U
To Next Page
Loading...