Sky Control SC8100 - Charts and Specifications; Master Modules Comparison

Comparison charts & specications
Master modules
S
C2100, SC2110, SC8100, SC8110 and SC1108 are master modules and cannot connect to each
other. For scalability please use extension modules and embedded modules.
Remote Control
SC8100 SC8110 SC2100 SC2110 SC1108
Device Management: Web, SNMP, manually via SMS
■ ■ ■ ■ ■
Access to sensors: Three-tiered access with login
■ ■ ■ ■ ■
Interface & Protocol support
SC8100 SC8110 SC2100 SC2110 SC1108
Interface: Access via Firefox, Chrome, Safari browsers. IE is not
supported.
■ ■ ■ ■ ■
LAN: Ethernet 10/100 Mbit
■ ■ ■ ■ ■
Network protocols: DHCP, HTTP, HTTPS, SNMP, SMTP, SSL, FTP,
Syslog, CAN
■ ■ ■ ■ ■
OS: Linux 2.6.38
■ ■ ■ ■ ■
RAM: 64Mb
■ ■ ■ ■ ■
ROM: 128Mb FLASH
■ ■ ■ ■ ■
Software: Built-in software for events processing
■ ■ ■ ■ ■
Alert types: FTP, Syslog, SMTP or SNMP, SMS (GSM modem is
ordered separately)
■ ■ ■ ■ ■
Pings: Built-in function for ping
■ ■ ■ ■ ■
LEDs: 4 green: ACT, CN1, CN2, ERR
■ ■ ■ ■ ■
LEDs: latching relais 4 4
□ □
8
Clock: Built-in clock with time synchronization
■ ■ ■ ■ ■
Watchdog: Built-in watchdog timer
■ ■ ■ ■ ■
Power
SC8100 SC8110 SC2100 SC2110 SC1108
Power input: 12V. Fuse at the inlet
□ □ ■ □ □
Power input: 240V C14 C14
□
C14 C20
Fuse: Fuse at the inlet 0,315A 10A
□
0,315A 16A
Output voltage: 240V
□
4 * C13
□ □
8 * C13
Max. power consumption: 25W 25W 20W 20W 20W
Max. total load current:
□
10А
□ □
16А
The maximum load current on the relay: 5А 10А
□ □
10А
Power reservation: 12V, built-in voltage monitor, voltage range
9-12.6V
■ ■ ■ ■ ■
■
Built-in □ None ● Extension ○ Not extandable
06
Charts and specications