Sky Control SC8100 - Page 9

Inlets/Outlets
SC8100 SC8110 SC2100 SC2110 SC1108
Ethernet: 100Mbit
■ ■ ■ ■ ■
USB: USB 2.0
■ ■ ■ ■ ■
Mini USB AB: USB 2.0 HS
■ ■ ■ ■ ■
Analog port: 6P4C for connection of any analog sensor 8 8 1 1 1
CAN BUS: 2 x 6P6C for connection of up to 8 CAN sensors on each
BUS. Fuse protection on each line.
■ ■ ■ ■ ■
Relay outputs: latching relays 240V*5A 4
□ □ □ □
Power output: latching relays 240V*10A
□
4
□ □
8
1-Wire: I-Touch button or proximity reader
■ ■ □ □ □
Environmental characteristics
SC8100 SC8110 SC2100 SC2110 SC1108
Operating temperature: 0 to 70 °C
■ ■ ■ ■ ■
Storage temperature: –25 to 85 °C
■ ■ ■ ■ ■
Operating humidity: 0 to 90 %, non-condensing
■ ■ ■ ■ ■
Storage humidity: 0 to 95 %, non-condensing
■ ■ ■ ■ ■
Other Features
SC8100 SC8110 SC2100 SC2110 SC1108
Installation: 19” 19” Desktop 19” 19”
Dimensions (L x W x H) in mm: 440*44*75 440*44*75 215*44*65 440*44*65 440*44*85
Weight: 1,5 kg 1,5 kg 1,2 kg 1,2 kg 1,8 kg
Scalability (modules are ordered separately)
SC8100 SC8110 SC2100 SC2110 SC1108
Extension modules SC408, SC450: Allows to increase the number
of sensors in the system. It is possible to connect up to 8 CAN sen-
sors and / or 8 modules to one CAN bus.
● ● ● ● ●
Dry contacts module SC16: Built-in into the master module
● ● ● ● ○
GSM modem SC920: Built-in into the master module
● ● ● ● ●
External Memory
SC8100 SC8110 SC2100 SC2110 SC1108
SD card: SD SD MicroSD MicroSD MicroSD
■ Built-in □ None ● Extension ○ Not extandable
07
Charts and specications