Page 24 December 2007
DC Electric Full-size RTs
Visual and Daily Maintenance Inspections Section 2 - Operations
2.8-5 Battery Compartment
Battery Tray•
Ensure tray is properly secured and there -
is no visible damage.
Ensure compartment latch is secure and -
in proper working order.
Battery•
Proper battery condition is essential to
good performance and operational safety.
Improper fluid levels or damaged cables and
connections can result in component damage
and hazardous conditions.
WARNING
Explosion hazard. Keep flames
and sparks away. Do not smoke
near batteries.
WARNING
Battery acid is extremely corrosive -
Wear proper eye and facial protection as
well as appropriate protective clothing.
If contact occurs, immediately flush with
cold water and seek medical attention.
1. Check battery case for damage.
2. Clean battery terminals and cable ends
thoroughly with a terminal cleaning tool or
wire brush.
3. Ensure all battery connections are tight.
4. If applicable, check battery fluid level. If plates
are not covered by at least 1/2” (13 mm)
of solution, add distilled or demineralized
water.
5. Replace battery if damaged or incapable of
holding a lasting charge.
WARNING
Use original or manufacturer-approved
parts and components for the aerial
platform.
Battery Connectors•
Ensure battery connectors are properly -
secured and t here i s no visi ble
damage.
Fuse Box•
Ensure fuse box is properly secured and -
there is no visible damage.
Batteries
Battery Connectors
Battery Tray
Fuse Box
To Next Page
Loading...
