SECTION 6, Page 35SJ-800 Series E Battery Powered
119153
A 110057 ASSEMBLY, 3 Arm Scissor
1 110395 1 ARM ASSEMBLY, 3rd Inner
2 110361 1 ARM ASSEMBLY, 3rd Outer
3 110347 1 ARM ASSEMBLY, 2nd Outer
4 110377 1 ARM ASSEMBLY, 2nd Inner
5 100071 AR BUSHING, End pin 1-1/4” x 2” lg.
6 110410 7 PIN, End 1-1/4”
(Ref.) 1 •PIN,End1-1/4”(limitswitchcam)
- (For Components, Refer to Figures 6.6-6 & 6.6-7)
103887 1 •BOLT,Hex-hd5/16”-18x3/4”lg.
103404 1 •WASHER,Lock5/16”
7 110363 1 ARM ASSEMBLY, 1st Inner
8 110328 1 ARM ASSEMBLY, 1st Outer
9 102236 12 PLATE, Center pin retainer
103887 20 •BOLT,Hex-hd5/16”-18x1”lg.
103404 20 •WASHER,Lock5/16”
101632 32 •BOLT,Hex-hd3/8”-16x3/4”lg.
103999 32 •WASHER,Lock3/8”
10 110408 6 PIN, Center 1-3/4” x 9-1/2” lg.
11 101564 18 BUSHING, Center pin 1-3/4” x 1-1/2” lg.
12 117840 6 BEARING, Thrust (not shown)
13 111135 8 BUMPER, Scissor arm 2-1/2” x 1-1/16” thk. (arm)
14 105395 4 BUMPER, Scissor arm 2-1/2” x 1-1/2” thk. (base)
15 131952 16 SPACER, Bumper
16 114043 4 BAR, Centering
103997 4 •WASHER,Flat1-1/4”
103972 4 •PIN,Cotter1/4”x21/2”lg.
17 112440 1 WELDMENT, Centering bar pivot/lowering valve
103865 1 •BOLT,Adjusting5/16”-18x2”lg.
103984 1 •NUT,Lock5/16”-18
18 (Ref.) 1 VALVE AND VALVE BLOCK ASSEMBLY
- (For Components, Refer to Figure 6.2-3)
19 (Ref.) 1 BEEPER, LIGHT AND HORN ASSEMBLY
- (For Components, Refer to Figures 6.6-6 & 6.6-7)
20 110418 4 PIN, Centering bar pivot
21 101689 3 WELDMENT, Centering bar pivot
103907 16 •BOLT,Hex-hd1/2”-13x11/2”lg.
103468 16 •WASHER,Flat1/2”
103470 16 •WASHER,Lock1/2”
103471 16 •NUT,Hex1/2”-13
22 101523 8 BUSHING, Centering arm 1-1/4” x 3/4” lg.
25 103997 4 WASHER, Flat 1-1/4”
24 115532 4 PIN, Cotter 1/4”
25 (Ref.) 2 CYLINDER ASSEMBLY, Lift
- (For Components, Refer to Figures 6.2-4)
26 111172 1 CORD ASSEMBLY, Holding valve (Not shown)
103256 1 •CABLE,18/2x321”lg.
119825 2 •CONNECTOR,Solenoid
Parts list continued on the following page.
Figure 6.2-1. Scissor Arm Assembly (Model 8831E)
Index
No.
Skyjack
Part No.
Description Qty.
AM