the “OFF” position. Preventative maintenance is the easiest and least expensive type of maintenance.
Use original or equivalent to the original parts and components for the aerial platform.
Daily Monthly 3 Months 6 Months 12 Months*
Structural damage/welds A A A
Parking brake B &E B &E B & E
Tires/wheels & fasteners A, B & C A, B & C A, B & C
Guides/rollers & slider pads A, B & I A, B & I A, B & I
Railings & railing lock pins A & C A & C A & C
Entry gates B & C B & C B & C
Bolts and fasteners C C C
Maintenance support B B B
Rust AA A
Wheel bearings & king pins A, B & E A, B & E A, B & E
Axle gear oil** FF
Steering cylinder & tie rod A, B & E A, B & E
Battery fluid level A A A
Control switches A & B A & B A & B
Cords & wiring A A A
Battery terminals A & C A & C A & C
Terminals & plugs C C C
Receptacle A & B A & B A & B
Limit switches B B B
Hydraulic oil level H H H
Hydraulic hoses/fittings A & L A, L & C A, L & C
Lift/lowering speeds GG
Cylinders A & B A & B
Emergency lowering B B B
Lift capacity DD D
Hydraulic oil filter FF
Labels and manual A, J & K A, J & K A, J & K
Lanyard attachments A & C A & C A & C
Check for applicable service bulletins AA
60280AE-PM
Weekly
Mechanical
Electrical
Hydraulic
C
A & B
Notes
Miscellaneous
A.Visually inspect.
B. Check operation.
C. Check tightness.
D. Check relief valve setting. Refer to serial number nameplate.
E. Lubricate.
F.Replace.
G. Refer to Table 2-1a and Table 2-1b, “Specifications and
Features.”
H. Check oil level.
I.Ensure there is no metal to metal contact with slider, slider side or running
surface. Check for free movement of surface. Also check for free
movement of the slider pin
J. Replace if missing or illegible.
K. Proper manual must be in box.
L. Check for Leaks.
* Record inspection date and signature.
** Gear Oil Requirements: Axle: ESSO GX 85W-140
Center Drive: ESSO GX 85W-140
To Next Page
Loading...
